ts-7000
[Top] [All Lists]

[ts-7000] Bluetooth problem

To:
Subject: [ts-7000] Bluetooth problem
From: "Fabio Vaz" <>
Date: Fri, 20 Jun 2008 21:57:12 -0000
Hi guys,

I have a problem with Bluetooth running Kernel 2.6.21 on a TS-7200. I 
was running Dan Smolik 2.6.23 Kernel and it was working fine. 

On Kernel 2.6.23 I scan and connect to devices just fine. You can see 
the scan bellow :

:root# hcitool scan
Scanning ...
        00:07:CF:58:CD:AB       Pen LZ8170501X8


HCI sniffer - Bluetooth packet analyzer ver 1.32
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Inquiry (0x01|0x0001) plen 5
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Complete (0x01) plen 1




On Kernel 2.6.21 the scan doesn't return the name of the device and 
after that I can't pair it too using the hcitool cc. See the scan 
following :

:dex# hcitool scan
Scanning ...
        00:01:00:07:CF:58       n/a

HCI sniffer - Bluetooth packet analyzer ver 1.32
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Inquiry (0x01|0x0001) plen 5
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Complete (0x01) plen 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Remote Name Req Complete (0x07) plen 255


Is this a known issue ? 


Regards,
Fabio Vaz.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU