[ts-7000] cross compile for opencv

To:
Subject:	[ts-7000] cross compile for opencv
From:	"allamack17" <>
Date:	Fri, 13 Jun 2008 18:50:01 -0000

I need to compile opencv for my ts7800 board.  How do I tell the
configure script to use the ts cross compiler?


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] cross compile for opencv, allamack17 <=

Previous by Date:	[ts-7000] Re: Auto..Run, naturalwatt
Next by Date:	[ts-7000] ts-7400 ethernet hw address?, atelierrobin
Previous by Thread:	[ts-7000] Re: Auto..Run, LaksCEO
Next by Thread:	[ts-7000] ts-7400 ethernet hw address?, atelierrobin
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU