--- In "amalgamatedsystems" <> wrote:
>
> Hi All,
> Has anyone used two (2) TS-SER4 boards with the TS-7200? I would
> really like 8 serial ports for an application I have.
>
> The current kernel only supports 4 ports (refer #define RS_TABLE_SIZE
> 4 in the ../include/asm-arm/arch/serial.h file) I have modify this to
> 8 and updated the STD_SERIAL_PORT_DEFNS initialisation. The kernel
> boots ok and the 'setserial' reports fine. However, when I try to use
> any of the ports they either work very slowly or simply just hang the
> board.
>
> Has anyone tried this? Is there something else that needs to be
> changed/checked in the kernel? Any clues?
>
> My modified 'serial.h' is below.
>
> Thanks & regards,
>
> Clive
Did you get that one up and running? I've made a post about fixing
this on http://tech.groups.yahoo.com/group/ts-7000/message/11697
kind regards,
wimpunk.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|