Re: [ts-7000] Re: TS7400 2.6.21

["Matt Stone" <>]

Hey all, 

I did fix this in the end, the 2.6 kernel booted fine when i attempted to bootload from the fastboot shell, not the 2.4 kernel as stated in TS logics how-to. 

This is slightly confusing and a highly annoying brick wall to bang ones head against, so i've posted this in case anyone else has the same oops.

Matt

2008/5/8 Matt Stone <matt.stone.uk@gmail.com>:

Sure,

I'm just using the bootloader configuration as stated in the 2.6 port howto:

insmod -f bootloader
bootload zImage

Matt

2008/5/7 j.chitte <>:

--- In ts-7000%40yahoogroups.com, "matt_stone_uk" <matt.stone.uk@...>
wrote:

>
> Hi guys,
>
> I've been trying to follow the 2.6 port howto found at
> http://www.embeddedarm.com/software/arm-linux-26-ts72xx.php
>
> The guide states this should be portable to the 7400 also.
>
>
> I managed to compile the kernel without much fuss, and attempted a
> bootload from my old 2.4 kernel.
>
> However when I try to boot I get problems with what looks like an
> incorrect IRQ configuration, and it's trying to force 7250
filesystems
> despite my kernel commandline specifying an nfs mount.
>

HI,

you probably need to post exactly what you are doing to boot rather
then just the result.

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___