--- In Jim Jackson <> wrote:
>
>
>
>
> On Sat, 24 May 2008, j.chitte wrote:
>
> > Hi,
> >
> > I just loaded zImage-7250_2k-ts11 that I got from the ftp server
a
> > couple of weeks back onto a 7250 .
> >
> > $ uname -a
> > Linux arm 2.4.26-ts11 #3 Tue Jun 6 14:13:14 MST 2006 armv4l
unknown
> >
> > I just noticed this in dmesg:
> >
> > Console: colour dummy device 80x30
> > Calibrating delay loop... 99.94 BogoMIPS
> > Memory: 8MB 8MB 8MB 8MB 8MB 8MB 8MB 8MB = 64MB total
> >
> > Now I have seen posts that this is problem when building a 2.6
kernel
> > and required a patch. But what is this about on a TS kernel?
> >
> > Unless I'm misreading something this means that the std issue TS
> > kernel is running the board at half speed.
> >
> > Am I mistaked?
>
> Probably. Are you thinking that bogomips == MHz ???
>
> 99Bogomips seems about right for an ep9302 clocked at 200MHz, under
a
> 2.4 kernel anyway.
>
probably a bad recollection of your post on the 2.6 patch issue.
Thanks for putting me straight.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|