>
> It sounds like a broken pico or one of the libs it uses. Maybe you
> should start by saying what hardware and OS you are using. Telepathy
> is a lousy bebugging technique. ;)
>
I am using TS-7300 board and the OS is (typing uname -a) Linux ts7000
2.4.26-ts11 #35 Thu Jul 6 15:44:29 MST 2006 armv41 GNU/LINUX.
I try to create a new file and pico shows segmentation fault. Here is
what dmesg returns:
pico: unhandled page fault at pc=0x2ab7d554, lr=0x2ab3901c (bad
address=0x00000018, code 7)
pc : [<2ab7d554>] lr : [<2ab3901c>] Tainted: P
sp : 7ffffa48 ip : 7ffffac4 fp : 7ffffac0
r10: 2ac24000 r9 : 0002a3a0 r8 : 0002a3d0
r7 : fffffff8 r6 : 00000000 r5 : 00000000 r4 : 0002a7d0
r3 : 0002a7a8 r2 : 00000000 r1 : 00000018 r0 : 0000001a
Flags: nZCv IRQs on FIQs on Mode USER_32 Segment user
Control: C000317F Table: 006DC000 DAC: 00000015
Thanks,
Daniel Souza
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|