[ts-7000] Accessing the Real-Time-Clock (RTC)

To:
Subject:	[ts-7000] Accessing the Real-Time-Clock (RTC)
From:	"uav_lab" <>
Date:	Wed, 30 Apr 2008 14:21:23 -0000

Does anyone know the syntax for interfacing with the RTC via C/C++ to
use it for executing code at specific intervals?  I've been using
clock() and CLOCKS_PER_SEC, but I get the feeling that it's not very
precise.  The upper bound for accuracy is in the 1kHz range. Thanks in
advance!

uav_lab 


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Accessing the Real-Time-Clock (RTC), uav_lab <= [ts-7000] Re: Accessing the Real-Time-Clock (RTC), charliem_1216

Previous by Date:	Re: [ts-7000] Re: SSH and FTP on a TS-7400, Jim Jackson
Next by Date:	[ts-7000] Re: Accessing the Real-Time-Clock (RTC), charliem_1216
Previous by Thread:	Re: [ts-7000] Re: SSH and FTP on a TS-7400, Jim Jackson
Next by Thread:	[ts-7000] Re: Accessing the Real-Time-Clock (RTC), charliem_1216
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU