On Thu, 10 Apr 2008, ApOgEE wrote:
> Hi everyone, I'm new with this SBC. Can anyone please tell me that is it
> possible to connect 8 LEDs on the XDIO (DIO2 header) and turn the LED On and
> Off.
Yes it is.
The pinout of the DIO2 is in the TS documentation.
> If it is possible, what is the pinout to connect 8 LEDs on DIO2 header. I'm
> currently booting Debian on SD card on this TS-7260. I've tried to connect
> one LED on pin 1 (XDIO 0) and pin 16 (3.3v). Is it the correct way? I can't
> find any document on the net regarding this. Please guide me to the correct
> way of doing this.
I'd consult your lecturer/tutor if you are stuck at this point.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|