Hi Scott,
> Hello, I am new to the TS-7300 and am trying to get my DIO2 to work as
> inputs. I have already successfully gotten them to work as outputs
> using similar code. The output of this program reads 0 at all times.
> I am using the 3.3V pin to get a voltage on to on of the input pins.
>
> I am trying to determine if it is either my code or how I am
> connecting to the inputs that is the problem....
I can't remember if I had problems, but take a look at
my notes, and perhaps there is something in there:
http://www.ovro.caltech.edu/~dwh/ts7300/
Cheers,
Dave
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|