On Tue, 8 Apr 2008, Yan Seiner wrote:
> I just discovered that the Buffalo LinkStation has the same CPU as the
> 7800... Since there seems to be lots of knowledge out there - e.g
> <http://buffalo.nas-central.org/index.php/Buffalo_ARM9_Kernel_Port>
> I'm now trying to figure out how difficult it would be to run a MythTV
> backend off a 7800.
>
> The biggest issue is getting enough storage. Does anyone know if it
> is feasible to get an eSATA port out of the FPGA?
I believe this to be impossible because the FPGA does not have any LVDS
serial IO ports, and even if it did, building a SATA host-controller in it
will be hard :-)
Regards
-------
Richard Sharpe, rsharpe[at]richardsharpe.com, rsharpe[at]samba.org,
sharpe[at]ethereal.com, http://www.richardsharpe.com
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|