> --- In "palvit2006" <> wrote:
>> Now i want to know that how can i make a sdcard from scratch using
>> this compiled kernel?
>>
This might help: http://oz.embeddedarm.com/~michael/support/faq.html#faq13
> This is a good question. I'm trying to make a script and include it to
> my build system. So far I'm stuck in mbr.dd file. According to the
> manual TS-7300 firmware is capable to read 512 bytes from the SD card.
> So 446 bytes of proprietary boot loader should load a kernel from the
> first partition to RAM at 0x218000 and initrd from the second at
> 0x1000000. That means we need to keep initrd really small. MBR image
> available on FTP server contains 16384 bytes... It includes partition
> table and some other code. I don't know may I ask support to explain
> how to use this MBR image.
What is the URL of the 16k image you are referring to?
> What I'm going to try is to remove the rest of the code after the first
> 512 bytes and see if it's important for the boot up procedure.
______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16610 East Laser Drive #10
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|