[ts-7000] TS-7800 brown out

["dawydiuk" <>]

Hello all,

We recently discovered all TS-7800 shipped prior to March 27 2008 are
susceptible to brown outs. We've discovered a production programming
process problem, where the brown detection functionality in the AVR
was not enabled. We are not aware of any field failures, but we
highly recommend all users run the enable_bod utility on their TS-
7800s to enable brown out detection. Please let me know if anyone has
any questions or problems?

The enable_bod utility can be downloaded here ftp://
ftp.embeddedarm.com/ts-arm-sbc/ts-7800-linux/binaries/ts-utils/
enable_bod

MD5SUM
d797ed54491be68308729f48f95599c8  enable_bod

--
Best Regards,
________________________________________________________________
 Eddie Dawydiuk, Technologic Systems | voice:  (480) 837-5200
 16610 East Laser Drive Suite 10     | fax:    (480) 837-5300
 Fountain Hills, AZ 85268            | web: www.embeddedARM.com



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/