[ts-7000] TS-71200 dev kit :Setting up the network with debian +lrz command on Debian?

["guillaume.blanchette" <>]

Hi everyone,

First of all, How do I put the computer in waiting to receive state 
when I am on Debian?

Second,I am not able to configure the network settings on debian.

I try it following the steps on page 17 of the linux for ARm user 

guide.  I use ifconfig and then I obtain:

eth0      Link encap:Ethernet  HWaddr 00:D0:69:41:08:77
          inet addr:192.168.1.138  Bcast:192.168.1.255  
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:39

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:560 (560.0 b)  TX bytes:560 (560.0 b)

I don't understand why the inet addr isn't 192.168.0.50 as when I 
boot on the on-board memory.

Does someone can help?

Thank you


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/