[ts-7000] Installing TS-CAN1 on TS7260 (newbie)

["Mariela" <>]

Hi everybody!

I have installed TS-CAN1 oceralincan driver, when I tried to use 
ocera utility sendburst I get 

can.o: Error: status register: 0x60 irq_register: 0x80 error: 0xd9
can.o: Error: status register: 0x60 irq_register: 0x80 error: 0xd9
can.o: Error: status register: 0x60 irq_register: 0x80 error: 0xd9
.
.
.
Error: status register: 0x60 irq_register: 0x80 error: 0xd9
can.o: Error: status register: 0x60 irq_register: 0x80 error: 0xd9
can.o: Error: status register: 0x60 irq_register: 0x80 error: 0xd9
can.o: Error: status register: 0x60 irq_register: 0x80 error: 0xd9
can.o: Error: status register: 0x44 irq_register: 0x82 error: 0xd9

I have already installed ocera driver in another TS-7260 following 
same steps and I get this error but seems to be working

./sendburst
can.o: Reset error
can.o: Error configuring chip.
CAN /dev/can0 : Sent block of 10 messages #: 0
CAN /dev/can0 : Sent block of 10 messages #: 1
CAN /dev/can0 : Sent block of 10 messages #: 2

mariela




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/