[ts-7000] FPGA programming questions

["Elizabeth" <>]

Hi everyone
Im working with a TS7300 and now im trying to program the altera FPGA
and I have some questions. 
- How can I program this FPGA: directly loading a code to the FPGA
with the command load_ts7300 mycode.rbf or must i use registers to
program the FPGA.
- I made my own verilog code for the FPGA but when I load it to the
board it lock up the board. The code i made handles the FPGA to give
outputs to generate signals (square, triangular, sinusoidal) at
different frequencies through the DIO2 pins but this code doesn't
control any other devices, just the pins I need.
My question is if it's possible to load a code like this or must I use
the ts7300_top file?

Thanks for any answer



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/