[ts-7000] TS7300 : How do I keep the framebuffer drivers from loading?

To:
Subject:	[ts-7000] TS7300 : How do I keep the framebuffer drivers from loading?
From:	"jpeshkin" <>
Date:	Wed, 27 Feb 2008 17:14:33 -0000

Hi All:

  I am trying to use the TS7300 with my own FPGA images, but the
drivers for the open_eth and framebuffer devices load no mater what I do.

  Has anyone succeeded at preventing these from loading?  I've
literally moved them out of /lib/modules and renamed their files on
the /part2 partition on the CF and they still seem to load.

Thanks




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS7300 : How do I keep the framebuffer drivers from loading?, jpeshkin <=

Previous by Date:	Re: [ts-7000] floating point corruption?, Martin Guy
Next by Date:	[ts-7000] setup NFS file system, nasim751
Previous by Thread:	[ts-7000] floating point corruption?, Heinrich du Toit
Next by Thread:	[ts-7000] setup NFS file system, nasim751
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU