Hello,
I tried the kernel and I can't do it work properly (in my board only
works properly the zImage-7250_2k-ts11 kernel)
When I tried to execute it, I received the following message:
RedBoot> load -r -b 0x00218000 -h 192.168.0.48 zImage-7250_2k-ts11-rt
Using default protocol (TFTP)
Raw file loaded 0x00218000-0x002c23db, assumed entry at 0x00218000
RedBoot> exec -c "console=ttyAM0,115200 root=/dev/mtdblock1"
Using base address 0x00218000 and length 0x000aa3dc
Linux version 2.4.26-ts11-rt (gcc version
3.3.4) #1
Wed Jan 30 08:53:44 MST 2008
CPU: Arm920Tid(wb) revision 0
Machine: ep9301
On node 0 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 1 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 4 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 5 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 16 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 17 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 18 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 19 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyAM0,115200 root=/dev/mtdblock1
Adeos 2.4r17c3/arm-ep9301: Root domain Linux registered.
Adeos: Pipelining started.
Console: colour dummy device 80x30
Calibrating delay loop... 99.73 BogoMIPS
Memory: 8MB 8MB 8MB 8MB 8MB 8MB 8MB 8MB = 64MB total
Memory: 60980KB available (1242K code, 343K data, 72K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
CPU: Testing write buffer: pass
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch
devfs: boot_options: 0x1
ttyAM0 at MMIO 0x808c0000 (irq = 52) is a AMBA
ttyAM1 at MMIO 0x808d0000 (irq = 54) is a AMBA
ttyAM2 at MMIO 0x808e0000 (irq = 55) is a AMBA
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ enabled
Real Time Clock Driver v1.10f
ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
Searching for NAND flash...
NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB
3,3V 8-bi
t)
Scanning device for bad blocks
Bad eraseblock 0 at 0x00000000
Using static partition definition
Creating 3 MTD partitions on "NAND 128MiB 3,3V 8-bit":
0x00000000-0x00004000 : "TS-BOOTROM"
mtd: partition "TS-BOOTROM" doesn't end on an erase block -- force
read-only
0x00004000-0x07d04000 : "Linux"
mtd: partition "Linux" doesn't start on an erase block boundary --
force read-on
ly
0x07d04000-0x08000000 : "RedBoot"
mtd: partition "RedBoot" doesn't start on an erase block boundary --
force read-
only
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Cannot open root device "mtdblock1" or 1f:01
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 1f:01
Adeos: Current domain=Linux on CPU #0 [stackbase=c403e000]
Linux[cpuid=0]: priority=100, status=0x0, pending_hi=0x0
thanks.
Leandro D. Sulik
--- In Ronald Gomes <> wrote:
>
> Hello,
>
> The binary rt-kernel for TS-7250_2k is now available:
>
ftp://oz.embeddedarm.com/ts-arm-linux-cd/binaries/ts-kernels/zImage-7250_2k-ts11-rt
>
> Ronald.
>
>
> l_sulik <> escreveu: Hi!
> I'm working whit a ts-7250 board (Nand flash has a sector size of 2k)
> and I need rtai kernel.
> The Rtai Kernels that I found in www.embeddedarm.com support a sector
> size of 512 byte.
> somebody know a rtai kernel which support a sector size of 2k??
>
> thanks.
> Leandro D. Sulik
>
>
>
>
>
>
> ---------------------------------
> Abra sua conta no Yahoo! Mail, o único sem limite de espaço para
armazenamento!
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|