[ts-7000] joystick

To:
Subject:	[ts-7000] joystick
From:	"artcar12" <>
Date:	Sun, 27 Jan 2008 23:59:12 -0000

My goal is to use a joystick with a TS-7800.  If I can get to the point 
where I can see characters on cat /dev/input/js0 I could probably 
figure it out from there.

So far I know that I have to configure and build a new kernel, but the 
config.gz file is not in /proc.  Does anybody know where to find this 
file or it's equivilent?  



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] joystick, artcar12 <=

Previous by Date:	[ts-7000] TS 7400, cryptyy
Next by Date:	[ts-7000] usb-ehci ts7400, bottrott
Previous by Thread:	[ts-7000] TS 7400, cryptyy
Next by Thread:	[ts-7000] usb-ehci ts7400, bottrott
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU