[ts-7000] Execute program on startup

["Richard" <>]

Hello again guys.  I am trying to get my program to execute right upon 
startup and I was wondering both how to start it up in the background 
when the system starts up as well as how to start one up and take o0ver 
the serial port.  For example program A will reset the watchdog to make 
sure the cpu does not reset form the WDT, and program B will be my own 
custom made interface or bash.  What configuration am I to use to set 
up the one as a service and set up the other one to control the main 
serial port.


Richard




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/