[ts-7000] phidgets

["Charlie Wallace" <>]

I've at least partially gotten my accelerometer phidgets working on the TS7300 after a few rough starts with the libusb version this is what i did.

At the very least its picking up the device names and some samples, but there seems to be some oddness in the sampling which might be down to the example app itself, there is also a Makefile.arm which has slightly different options so i will try that too, but it didn't work OOB for me.

 

First off, I went here

 

http://www.phidgets.com/downloads.php?os_id=3

Clicked linux source . which at the time is, http://www.phidgets.com/downloads.php?os_id=3&fw_id=3&fw_file_id=3 

and http://www.phidgets.com/downloads.php?example_id=30 for the examples.

 

untarred the two archives to my mounted ram drive (a lot faster if you're compiling on device !  )

 

cd'd to the working/Phidgetlinux/phidget21/ folder and did

 

make

make install

 

then to the examples folder and did a make there too.

 

I added this to my fstab

 

none            /proc/bus/usb             usbdevfs        defaults   0   0

 

or this

 

mount -t usbdevfs none /proc/bus/usb

 

and finally ran the example program, the phidgetswebservice also builds too, but i didn't run that.

 

 

cheers,

charlie

 

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___