charliem_1216 wrote:
> --- In Fotis Loukos <> wrote:
>> Daniel Smolik wrote:
>>> Hi,
>>>
>>> I have trying compile tssdcard.ko I spend lot of time and
> haven't
>>> success. I must modify Makefile to link code with binary blob.
>>> #
>>> # SD Card driver for TS-ARM
>>> #
>>> obj-m := tssdcard.o
>>> tssdcard-y := tssdcard2.o sdcore2_bin.o
>>>
>>> obj-$(CONFIG_TS_SDCARD) += tssdcard.o
>>>
>>>
>>> But get this:
>>>
>>> arm-none-linux-gnueabi-ld: ERROR: Source object
>>> drivers/mmc/sdcore2_bin.o has EABI version 0, but target
>>> drivers/mmc/tssdcard.o has EABI version 4
>>> arm-none-linux-gnueabi-ld: failed to merge target specific data
> of file
>>> drivers/mmc/sdcore2_bin.o
>>> make[2]: *** [drivers/mmc/tssdcard.o] Error 1
>>>
>>> I mean this shows that TS use different compiler to compile
> blob than I
>>> download from TS pages. I normaly use gcc 4.4 and this fail
> too but
>>> with another messages.
>>>
>>> Dan
>>>
>>>
>>>
>>>
>>>
>>>
>> I have created an EABI version 4 sdcore2.o. But I'm not sure if I
> can
>> distribute it. Some reverse engineering has been done so... Any
> lawyers
>> here? :)
>>
>> Fotis
>>
>
> Why don't you ask TS? They want to support 2.6, I'm sure they would
> generate the proper module. But they might need some guidance on
> why it's needed and how to do it. (I didn't even know there were
> different EABI versions)
>
> Or, you could simply post instructions on how do the modifications.
> But that's not a long term solution.
>
> Or, TS could release the source :) (Just kidding ... I know the
> issues. Too bad though, that TS signed the NDA. I think there is
> enough info publicly available to do the interface now).
>
>
> Regards, .......... Charlie
>
I asked TS and they told me they're not sure if it's legal. I'm willing
to work together with them and create a driver. From the hits at my
website I see that a lot of people are interested in this driver.
Fotis
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|