I tried the remount a few times and was unable to get it to work. Here
is an example of what it does.
#
# mount
/dev/root on / type ext2 (rw)
none on /dev type devfs (rw)
/proc on /proc type proc (rw)
/dev/sdcard0/disc0/part3 on /mnt/root type ext2 (ro)
# mount -O remount,rw /dev/sdcard0/disc0/part3 /mnt/root
mount: invalid option -- O
mount: Mounting remount,rw on /dev/sdcard0/disc0/part3 failed: No such
file or directory
#
--- In "Michael Schmidt" <> wrote:
>
>
> On Tue, December 18, 2007 12:42 pm, Art wrote:
> ...
> > file system is readonly and I need it to be RW. I can't seem to find
> > where I change that in the fastboot script. Once I make the
>
> IIRC you may have an early revision that mounts the filesystem
before the
> rc file is called. You can remount the filesystem rw something like
this:
>
> mount -o remount,rw /dev/sdcard0/part2 /
>
> That's not exactly correct, the device name will be slightly different.
> But if you run "df" it should show the device and mount point; those are
> what you would use.
>
> ______ Best Regards,
> |__ __/ Michael Schmidt
> || Software Engineer
> ||echnologic Systems (EmbeddedARM.com)
> || (480) 16610 East Laser Drive #10
> |/ 837-5200 Fountain Hills, AZ 85268
> http://oz.embeddedarm.com/~michael
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|