Hello,
> Thank you very much for your reply, I haven't thought of this method.
> How about the second question? Could you give me some information on how
> to load the firmware from inside the driver? I'm thinking of using the
> request_firmware() interface so I can load any firmware on demand but I
> want to know how to send it to the FPGA.
Sorry for not responding sooner... There is an example 2.4 driver for
loading a bitstream into the FPGA here
ftp://ftp.embeddedarm.com/ts-arm-linux-cd/sources/load_fpga/
--
Best Regards,
________________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16610 East Laser Drive Suite 10 | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|