[ts-7000] Entering redboot without console

To:
Subject:	[ts-7000] Entering redboot without console
From:	"wimpunk" <>
Date:	Wed, 12 Dec 2007 09:55:57 -0000

Hi,

Is there away to enter redboot without connecting a console to COM1?
I've used arping and telnet before on Linksys Nslu2[1] and I hoped
it's also possible on TS-7260.

Kind regards,

wimpunk.

[1] http://www.nslu2-linux.org/wiki/HowTo/TelnetIntoRedBoot



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Entering redboot without console, wimpunk <= Re: [ts-7000] Entering redboot without console, Jim Jackson

Previous by Date:	Re: [ts-7000] Re: make problem, Jason Stahls
Next by Date:	[ts-7000] Re: make problem, nachozamora
Previous by Thread:	[ts-7000] make problem, nachozamora
Next by Thread:	Re: [ts-7000] Entering redboot without console, Jim Jackson
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU