ts-7000
[Top] [All Lists]

[ts-7000] Re: Hardware help needed for TS-7300

To:
Subject: [ts-7000] Re: Hardware help needed for TS-7300
From: "Sukhoi-37" <>
Date: Fri, 07 Dec 2007 09:24:10 -0000
Dear All,

Is it true that TS has an India office or a tie-up to promote and sell
hardware? I am looking to buy some hardware. Please help on this. 

Thanks,

Su37


>
> Hi Sukhoi :)
> I made quite a similar mistake with ordering a 7260 and thats the same
> answer they gave me. Anyway for your situation there is sort of a
> workaround.
> 
> I checked the TS 7300 and seemingly you have a lot of RS232s :) you
can use
> RS232 to RS485 converter circuit to get what you want done. The
conversion
> ICs are readily available and with minimal external circuitry you
would be
> able to get it up and running.
> 
> 
> On 8/17/06, Sukhoi-37 <> wrote:
> >
> >    Hi All,
> >
> > I am new to TS-7300. But I did a mistake while ordering the board. I
> > did miss these components:-
> >
> > #1 Battery Packed RTC
> > #2 Full Duplex RS-485
> > #3 On Board Temperature Sensor
> >
> > I did mention with the TS, this is what the response:-
> >
> > "The full duplex RS-485 or battery backed RAM can not be installed in
> > the field. You must return the board to us to reprogram after
> > installation. So, you can install them, but there is additional
> > reprogramming that we must perform.
> >
> > The on board temperature sensor, can be soldered by anyone who has the
> > ability to solder and requires no additional programming"
> >
> > I did incur the following bill:-
> >
> > 7300 board with 64 MB + Power Supply + Shipping to UK - 332 USD
> > Import Duty - 63 British Pounds
> > 1 GB SanDisk - 85 USD (purchased locally)
> >
> > The real pain for me is sending the board and getting it back (more
> > $$). Anyway, I can't blame TS guys for anything.
> >
> > Could anyone suggest me any alternative or guide me to integrate the
> > RTC & RS-485 on my 7300 board (shall take care of Temp Sensor myself)?
> >
> > Thanks,
> > Su37
> >
> > 
> >
>




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU