[ts-7000] ts-7300 framebuffer for linux kernel 2.6

To:
Subject:	[ts-7000] ts-7300 framebuffer for linux kernel 2.6
From:	Fotis Loukos <>
Date:	Fri, 30 Nov 2007 13:13:05 +0200

Hello,
I have written a framebuffer device driver for kernel 2.6.21-ts. It 
works fine (tested with embedded qt and other programs which use the 
framebuffer device) but the big problem is that I have to pass the 
screen resolution as a parameter. At 
http://tech.groups.yahoo.com/group/ts-7000/message/6327 I saw that the 
TS driver for kernel version 2.4 can automatically detect the screen 
resolution. How can this be done?
I would also like to know how can I load my own firmware. Are there any 
sources?

Thanks,
Fotis


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] ts-7300 framebuffer for linux kernel 2.6, Fotis Loukos <=

Previous by Date:	[ts-7000] FFT very slow on TS-7260, kurmannthomas
Next by Date:	[ts-7000] Re: FFT very slow on TS-7260, Gonzalo A. de la Vega
Previous by Thread:	[ts-7000] FFT very slow on TS-7260, kurmannthomas
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU