ts-7000
[Top] [All Lists]

[ts-7000] Re: Compling wireless driver?

To:
Subject: [ts-7000] Re: Compling wireless driver?
From: "Mahdi Jafari" <>
Date: Fri, 02 Nov 2007 11:46:52 -0000
Dear Gonzalo,

Thanks for your help. After playing a little bit with the makefile I
could compile the zd1211 driver r85 but still the problem exists.

In fact the drivers (both r83 and r85) load into kernel successfully
but after running the command:
>>> iwconfig wlan0 essid ArmLinux mode master rate 11M
sometimes, the message "******* Schedule task fail *********" appears.

I have also changed my kernel from ts11 to ts10 but the same things
happen and also sometimes the device hangs.

I don't know whether you have any suggestion or idea.

Thanks,
Mahdi




--- In  "Gonzalo A. de la Vega"
<> wrote:
>
> --- In  "Mahdi Jafari"
> <mahdijafarisiavoshani@> wrote:
> >
> > Hi everybody,
> > 
> > has anybody compiled the wireless driver for the chipset zd1211?
> > I have a ts-7300 board and a usb wireless card with chipset zd1211b. I
> > use driver version r83. Usually every thing work fine but sometime the
> > wireless card hangs and the dmesg shows a Timeout message. 
> > I wanted to compile newer version of driver to find out whether it
> > solves my problem or not.
> 
> You need the source from TS's ftp:
>
ftp://ftp.embeddedarm.com/ts-arm-linux-cd/sources/zd1211-driver-r51-src.tar.gz
> 
> and get the div64.S file (you'll get an undefined symbol otherwise).
> Check the Makefile out to see how to build. You may just copy both
> files to the r83 tree (keeping the same relative paths).
> 
> If you are going to modify the driver, you need to "make clean" before
> rebuilding. Just "make" doesn't work... at least for me.
> 
> Good luck,
> 
> Gonzalo
>




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU