[ts-7000] Re: DIO

To:
Subject:	[ts-7000] Re: DIO_8 Location
From:	"Fred" <>
Date:	Wed, 31 Oct 2007 20:13:54 -0000

--- In  Jim Jackson <> wrote:
> On Tue, 16 May 2006, Robert Magyar wrote:
>> All of the documentation shows DIO_8 at 0x8084 
>> 0030 bit 0 (FGPIO_0 in the schematic).  I was 
>> not able to read it as an input.  After trying
>> a few things it I found that the DIO_8 pin is 
>> located at bit 1 of the register.
> Yes it was wrongly documented. Caused me no 
> end of trouble when writing my adio program
>     http://www.comp.leeds.ac.uk/jj/linux/adio.tgz

Argh!  That would explain why I couldn't get anything to work off of 
the pin.  Now I finally have my LED working!  (Well, one of them, any 
way.)  }:-}




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Re: DIO_8 Location, Fred <=

Previous by Date:	[ts-7000] windows version gdb debuger, chaisc97
Next by Date:	Re: [ts-7000] Cannot set or synchronize the RTC with Hwclock on TS-7800, Michael Schmidt
Previous by Thread:	[ts-7000] windows version gdb debuger, chaisc97
Next by Thread:	[ts-7000] booting linux 2.6.?? on ts-7260, kmoore37918
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU

[ts-7000] Re: DIO_8 Location