This all started when I mounted /dev/mtdblock1 after I had booted from
NAND Flash. Dumb I know.
Here is how I was able to boot using flash after a flash ecc error.
1 ) boot using busybox-rootfs on a SD Card.
2 ) mount and unmount /dev/mtdblock1
3 ) dd if=/dev/tssdcard1 of=/mtdblock1
4 ) save
I am then able to remove the SD Card and boot from flash..
Whether this is recommended way of restoring the nand flash, is
another question..
Brian
--- In "bfbay2005" <> wrote:
>
> I've managed to mess up the on board flash.. It's not clear to me how
> to restore the flash from an SD card. I have created a bootable SD
> card. I just need to know how to restore. I have looked at the
> ts7400 guide, and my efforts were unsuccessful.
>
> Thanks -
> Brian
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|