RE: [ts-7000] Auto mounting USB data drive

["Robert Bond" <>]

I tried this the other day with a drive formatted as NTFS and it just appeared automatically as /dev/sdb for the drive and /dev/sdb1, /dev/sdb2 and /dev/sdb3 for the three paritions. Here’s the output of lsmod on my system…

 

lsmod

Module                  Size  Used by    Not tainted

zd_b                  278240   0  (unused)

sd_mod                 11100   0  (unused)

scsi_mod               53820   1  [sd_mod]

usb-ohci-ep93xx          892   0  (unused)

usb-ohci               15580   0  [usb-ohci-ep93xx]

pcipool                 2080   1  [usb-ohci-ep93xx usb-ohci]

usbcore                55944   1  [zd_b usb-ohci]

af_packet               9456   0

tsuart-rf               1108   0  (unused)

tsuart0                 9360   0  [tsuart-rf]

 

Most of the USB modules are there to support the zd_b module.  I have no idea which ones I really need. You might try some combination of these…

 

            Bob

 

---

From: [mailto:] On Behalf Of Samuel M. Smith
Sent: Wednesday, October 17, 2007 10:23 AM
To:
Cc: Samuel M. Smith
Subject: [ts-7000] Auto mounting USB data drive

 

Anyone have a script for automounting a USB drive VFAT upon insertion as data (not boot drive)?

 

 

**********************************************************************

Samuel M. Smith Ph.D.

2966 Fort Hill Road

Eagle Mountain, Utah 84005-4108

801-768-2768 voice

801-768-2769 fax

**********************************************************************

"The greatest source of failure and unhappiness in the world is

giving up what we want most for what we want at the moment"

**********************************************************************

 

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___