Has anyone had any luck getting Logitech Quickcams working?
:root# lsusb
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 002: ID 046d:08d9 Logitech, Inc.
Bus 001 Device 003: ID 046d:08a6 Logitech, Inc.
I've got 2 and both fail in the same way:
:root# spcacat -g -d /dev/video1
Spcaview version: 1.1.7 date: 06:11:2006 (C)
video /dev/video1
Camera found: Logitech QCIM
VIDIOCGPICT brightnes=32768 hue=0 color=0 contrast=32768
whiteness=0depth=8 palette=21
Bridge found: ZC301-2
is_spca SPCA505
is_spca SPCA506
is_spca SPCA501
is_spca SPCA508
is_spca SPCA504
is_spca SPCA500
is_spca SPCA504B
is_spca SPCA533
is_spca SPCA504C
is_spca SPCA561
is_spca SPCA536
is_spca SN9C102
is_spca ZR364XX
is_spca ZC301-2
quality 1 autoexpo 1 Timeframe 0
StreamId: 0 Camera
try palette 21 depth 8
Available palette 21
try palette 15 depth 12
Couldnt set palette first try 15
Damned second try fail
try palette 4 depth 24
Couldnt set palette first try 4
Damned second try fail
try palette 3 depth 16
Couldnt set palette first try 3
Damned second try fail
try palette 5 depth 32
Couldnt set palette first try 5
Damned second try fail
probe size in
Available Resolutions width 640 heigth 480
Available Resolutions width 384 heigth 288
Available Resolutions width 352 heigth 288
Available Resolutions width 320 heigth 240
Available Resolutions width 192 heigth 144
Available Resolutions width 176 heigth 144
cmcapture: Invalid argument
Format asked 15 check -1
Couldnt set videopict params with VIDIOCSPICT
:root#
dmesg says:
Linux video capture interface: v1.00
usb.c: registered new driver spca5xx
spca_core.c: USB SPCA5XX camera found. Logitech QC IM Connect
spca_core.c: USB SPCA5XX camera found. Logitech QC IM
spca_core.c: spca5xx driver 00.57.08LE registered
spca_core.c: VIDIOCMCAPTURE: invalid format (15)
spca_core.c: VIDIOCMCAPTURE: invalid format (15)
I have 2 cameras hooked up to the board, and both fail the same way.
Both cameras work fine on a MIPS board and on an AMD64 system.
It's possible that the driver won't handle 2 cameras (I just though of
that and I have no way to test as I am not at the board) but it's also
possible that it's something to do with the ARM architecture and/or
the TS/EP93xx USB port....
I've tried both the spca5xx/LE patched for these cameras and the
full-blown spca5xx drivers.
Both scpacat and vgrabbj fail to grab an image.
I can't use the 2.6 kernel with the gspca driver as I haven't found a
way to boot it from the CF card on the 7200....
--Yan
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|