ts-7000
[Top] [All Lists]

[ts-7000] TS-7250 w/USB dev system

To:
Subject: [ts-7000] TS-7250 w/USB dev system
From: "Anouk Ahamitet" <>
Date: Fri, 28 Sep 2007 13:16:40 -0000
Every time I cycle power (or disconnect the USB memory stick) it seems
to reset the time of the last fsck to over 49,000 days ago (that's
sometime in the late 1800s, by the way).  It seems that everything I
write to the disk is saved (and yes, I'm always careful to either
shutdown the system, or at least umount the USB before disconnecting it).

I was wondering if anyone else has seen the same thing with either a
pre-built USB from TS, or a home-built one using the Debian-Sarge
package from the TS ftp site.  I see it on both and was wondering what
I might need to do to stop it from happening -- if I can.

Also, while I'm here, I see these three mysterious 'find' warnings
when I run "sh loadUSB.sh" and am wondering if anyone can point me to
the right place to fix them:

find: warning: you have specified the -maxdepth option after a
non-option argument -perm, but options are not positional (-maxdepth
affects tests specified before it as well as those specified after
it).  Please specify options before other arguments.

find: warning: you have specified the -depth option after a non-option
argument -mtime, but options are not positional (-depth affects tests
specified before it as well as those specified after it).  Please
specify options before other arguments.

find: warning: you have specified the -depth option after a non-option
argument -mtime, but options are not positional (-depth affects tests
specified before it as well as those specified after it).  Please
specify options before other arguments.

I didn't add any find commands to the boot (or USB load) sequence, so
I must assume that these are mistakes in the Debian-Sarge image I
downloaded from the TS ftp site.  I'm using the debian-sarge-1.12.tar
file that I found there in a 512M USB drive my boss gave me.



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU