Hello, it's just to tells you that I have a TS-7400 and i try to
capture with my µSoft VX-3000. When I got news, i'll send them .. !
Ciao
--- In "Daniel Perron" <> wrote:
>
> If you look at the driver for kernel 2.6 ,gspcav1-20070508, the
camera is
> like the VF0010
>
> {USB_DEVICE(0x041E, 0x403b)}, /* Creative Webcam Vista
(VF0010) */
>
> Just modify spca5xx.c to use the same case
>
> case 0x401a:
> case 0x403b:
>
> P.S. Don't forget to put the USB_DEVICE id in the table.
>
> Daniel
>
>
> -----Original Message-----
> From:
Behalf Of
> Daniel Perron
> Sent: Wednesday, September 26, 2007 2:08 PM
> To:
> Subject: RE: [ts-7000] Re: Web Cam
>
>
>
> Oops there is also some function to change like
>
> static int spcaDetectCamera(struct usb_spca50x *spca50x)
>
> adding the the model number
>
> File: spca5xx.c Col 0 172779 bytes
> 73%
> break;
> case 0x046d: /* Logitech Labtec */
> case 0x041E: /* Creative cameras */
> switch (product) {
> ==> case 0x401A: add relevant code here
> case 0x400A:
>
> spca50x->desc = CreativePCCam300;
> spca50x->bridge = BRIDGE_SPCA500;
> spca50x->sensor = SENSOR_INTERNAL;
>
> spca50x->cameratype = JPEG;
> info("USB SPCA5XX camera found. Type Creative PC-CAM 300
> (SPCA500+unknown CCD)");
> memcpy(&spca50x->funct,&fspca500,sizeof(struct
> cam_operation));
> break;
>
> maybe the best way is to check if that model could be the same
than some
> other and just add an case in the list.
>
> P.S. you will need to check the rest of the files also.
>
>
> Daniel
>
>
> -----Original Message-----
> From:
Behalf
> Of Daniel Perron
> Sent: Wednesday, September 26, 2007 1:57 PM
> To:
> Subject: RE: [ts-7000] Re: Web Cam
>
>
>
>
>
>
> The version i got ,spca5xx-20060402, doesn't have that camera.
> Check if the latest source code has that camera or try to add it.
>
>
> Try to figure out if this camera is the same than one of the
> manufaturer's models.
>
> Add it on spca5xx.c files (Check the '===> to add the stuff');
>
>
> Recompile the spca5xx driver and try it. Good chance that it
will but
> there is no guaranty.
>
>
>
>
> in files spca5xx.c
>
>
> static struct cam_list clist[] = {
> {UnknownCamera, "Unknown"},
> {IntelPCCameraPro, "Intel PC Camera Pro"},
> {IntelCreateAndShare, "Intel Create and Share"},
> {GrandtecVcap, "Grandtec V.cap"},
> .....
> .....
> {PhilipsSPC600NC, "Philips SPC600NC "},
> {PhilipsSPC300NC, "Philips SPC300NC "},
> {Sonix6019, "Sonix VGA Ov7630 "},
> ===> {CreativePCCam300, "Creative PC-CAM PD1100"},
>
> {-1, NULL}
> };
>
>
>
>
> #if LINUX_VERSION_CODE > KERNEL_VERSION(2,3,0)
> static __devinitdata struct usb_device_id device_table[] = {
> {USB_DEVICE(0x0733, 0x0430)}, /* Intel PC Camera Pro */
> {USB_DEVICE(0x0733, 0x0401)}, /* Intel Create and Share */
> ....
> ...
> .... (line below are similar to what you have
> {USB_DEVICE(0x041E, 0x400A)}, /* Creative PC-CAM 300 */
> {USB_DEVICE(0x084D, 0x0003)}, /* D-Link DSC-350 */
> {USB_DEVICE(0x041E, 0x400B)}, /* Creative PC-CAM 600 */
> ....
> ....
> {USB_DEVICE(0x0c45, 0x6019)}, /* Generic Sonix OV7630 */
> {USB_DEVICE(0x0c45, 0x6024)}, /* Generic Sonix Tas5130c */
>
> ===> {USB_DEVICE(0x041e,0x401A)}, /* this is your new
camera
> */
>
> {USB_DEVICE(0x0000, 0x0000)}, /* MystFromOri Unknow
Camera */
> {} /* Terminating entry */
> };
>
>
>
> Daniel
>
>
>
>
>
>
>
> -----Original Message-----
> From:
> Behalf Of newpants2004
> Sent: Wednesday, September 26, 2007 1:16 PM
> To:
> Subject: [ts-7000] Re: Web Cam
>
>
> what application snapshot you are using?
>
> --- In "Laks" <laks@> wrote:
> >
> > Hi to every one
> >
> > I did the following to connect a Creative vista PD1100
webcam with
> ts7250 board
> >
> > i ended up with the following message when i run an application
> snapshot
> >
> > "could not open dev/video0"
> >
> > "no such device"
> >
> > I did the following
> >
> > 1.insmod usbcore
> > 2insmod pcipool
> > 3insmod usb-ohci
> > 4 insmod usb-ohci-ep93xx
> > 5 insmod videodev.o
> > 6 insmod spca5xx.o
> >
> > for all these inmoding i did not get any error
> > except for the following when i inserted the usb-ohci-ep93xx "
> vend/prod 041e/401a is not claimed by any active driver
> > this is the vender and the product ID of my web cam
> >
> > i used mknod /dev/video0 c 81 0
> >
> > to create the dev/video0 since it was not created
automatically by
> inserting the driver modules
> >
> > when i listed the modules using lsmod
> >
> > i could see all the drivers inserted earlier
> >
> > -laks
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|