still cant find the quickcam.o anywhere.......
:~/Desktop/qc-usb-0.6.5$ make
-=- Logitech QuickCam USB camera driver -=-
Makefile target examples:
make all - Compile driver and utilities against current running kernel
make all USER_OPT=-DDEBUG - Compile with debugging code and messages
make all LINUX_DIR=/usr/src/linux24 - Compile against specified kernel
source
make install - Copy driver and utilities into standard locations
(needs root)
make install PREFIX=/usr - Copy utilities to /usr/bin instead of
/usr/local/bin
make install MODULE_DIR=/lib/modules/2.4.0 - Copy module to
/lib/modules/2.4.0/misc
make clean - Remove object files from the source directory
Current configuration:
Driver source directory (PWD): /home/tian/Desktop/qc-usb-0.6.5
Kernel source directory (LINUX_DIR): /usr/src/linux24
Module install directory (MODULE_DIR): /lib/modules/2.4.0
Utility install directory (PREFIX): /usr/local
User options (USER_OPT): -DHAVE_UTSRELEASE_H=0
Driver file name (use with insmod): quickcam.o
Kernel version code: 132122
:~/Desktop/qc-usb-0.6.5$ sudo find / -name quickcam.o
:~/Desktop/qc-usb-0.6.5$
another question what kind streaming software you are using?
could you be able to using spcasev or streamer?
i did install spca5xx-source_20060501-2_all.deb on the borad, would
this help anything?
thanks a lot
--- In "bibhu" <> wrote:
>
> It isn't advisable to compile it on the board.
> Since you have the cross tools set up ( for videodev.o), you can
> easily cross compile.
> Try read the little bit of documentation in qc-usb-0.6.5.
> You will need to do make all LINUX_DIR
> = /home/bibhu/TS7300/ksrc/linux24 etc etc if you have followed my
> link for videodev.o
>
> Also, look inside makefile and see that CC=arm-linux-gcc, LD=arm-
> linux-ld, etc...Make sure arm-linux tools are in your path.
> Watch whats happening when you make. Analyze.
>
> Hope this helps.
>
> Bibhu
>
> --- In "newpants2004" <newpants2004@>
> wrote:
> >
> > i download the source file to the ts7200 board,
> > try to compile on the board, simply because i dont know how to cross
> > compile.
> >
> > this is what i have:
> >
> > :qc-usb-0.6.5# make
> > -=- Logitech QuickCam USB camera driver -=-
> >
> > Makefile target examples:
> > make all - Compile driver and utilities against current running
> kernel
> > make all USER_OPT=-DDEBUG - Compile with debugging code and messages
> > make all LINUX_DIR=/usr/src/linux - Compile against specified kernel
> > source
> > make install - Copy driver and utilities into standard locations
> > (needs root)
> > make install PREFIX=/usr - Copy utilities to /usr/bin instead of
> > /usr/local/bin
> > make install MODULE_DIR=/lib/modules/2.4.0 - Copy module to
> > /lib/modules/2.4.0/misc
> > make clean - Remove object files from the source directory
> >
> > Current configuration:
> > Driver source directory (PWD): /root/qc-usb-0.6.5
> > Kernel source directory (LINUX_DIR): /lib/modules/2.4.26-
> ts11/build
> > Module install directory (MODULE_DIR): /lib/modules/2.4.26-ts11
> > Utility install directory (PREFIX): /usr/local
> > User options (USER_OPT): -DHAVE_UTSRELEASE_H=0
> > Driver file name (use with insmod): quickcam.o
> > Kernel version code: 132122
> >
> >
> >
> > everything looks ok,
> > but i cant find the quickcam.o anywhere.
> >
> > :qc-usb-0.6.5# find / -name quickcam.o
> > /dev/ide/host0/bus0/target0/lun0: p1
> > :qc-usb-0.6.5#
> >
> > could someone help me out?
> > if this is the wrong way to do this, can someone tell me how to
> cross
> > compile?
> >
> > thanks a lot
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|