Hi Jim.
Thanks for your post and I will be investigating a little more on that.
--- In Jim Jackson <> wrote:
>
>
>
> On Thu, 13 Sep 2007, brenesandre wrote:
>
> > Someone can help me to find how can I do to run a GNU/Linux command
> > call tinysnmpget in my TS-7250 that is running TS-Linux. I also need
> > HELP in try to find a code in c or c++ to handle the ethernet port
> > because I need to use the response of tinysnmpget to make a decision.
>
> Hi,
>
> this is not a TS board specific question. The boards run Linux, and
linux
> handles the ethernet for you and provides a standard networking
> programming interface. There are lots of tutorials and FAQs on writing
> networking code for Unix/Linux on the internet - Google is your friend.
> Try searching for these words in google
>
> unix network programming tutorial
>
> and follow up on several of the excellant tutorials and code
examples out
> there.
>
> In order to run any program on the board, you need an executable of it.
> If you have the source code for the program then set up a
> cross-compilation environmnet as explained in the Technologics
> documentation, and compile/build the application. Transfer it to the
> board and run it :-)
>
> If you are running the Debian image on the board you may be able to
> install it using the command
>
> apt-get install tinysnmp-tools
>
> see the debian website for for information.
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|