Hi,
i just try to let the jffs2 work on my board. i put jffs2 on the
0x240000, Creating 3 MTD partitions. however i get the following error
ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
about to do sbc_setinfo
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
Technologic Systems TS-7XXX IDE initialization - driver version 1.3,
6/21/04.
TS-7200 flash: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Creating 3 MTD partitions on "TS-7200 flash":
0x00000000-0x00040000 : "redboot"
mtd: Giving out device 0 to redboot
MTD_add, size=262144
0x00040000-0x00240000 : "linux"
mtd: Giving out device 1 to linux
MTD_add, size=2097152
0x00240000-0x00880000 : "jffs2"
mtd: Giving out device 2 to jffs2
MTD_add, size=6553600
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/usb-ohci.c: USB OHCI at membase 0xe0020000, IRQ 56
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
ov511.c: Error: /proc/video/ does not exist
usb.c: registered new driver ov511
ov511.c: v1.63 for Linux 2.4 : ov511 USB Camera Driver
Linux video capture interface: v1.00
ISDN subsystem Rev: 1.2/1.2/1.2/1.2/none/1.2
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
Freeing initrd memory: 4288K
jffs2: Too few erase blocks (2)
Kernel panic: VFS: Unable to mount root fs on 1f:00
i have try many method however it still not work
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|