Hi --
--- In "Triffid Hunter"
<> wrote:
>
> On Sat, 08 Sep 2007 07:27:49 +1000, Petr Stetiar <>
wrote:
>
> > Laks <> [2007-09-07 09:37:39]:
> >
> >> Hi Ynezz
> >
> > Hi
> >
> >> could you give your 2.6 kernel online ?
> >
> > Kernel:
> > -------
> >
http://ynezz.ibawizard.net/ts7250/oe/zImage-2.6.22.6-r0-ts72xx-20070906203102.bin
> >
> > Rootfs:
> > -------
> >
http://ynezz.ibawizard.net/ts7250/oe/Angstrom-minimalist-image-mtdutils-glibc-ipk-2008.1-test-20070907-ts72xx.rootfs.tar.bz2
> >
> > I'm using that rootfs as root over nfs. Please note, that it's
EABI so
> > you
> > might have a problem to run some precompiled binaries.
> >
> > If you boot it successfully, please can you give me output
of 'cat
> > /proc/cpuinfo | grep Serial' command? Thanks.
> >
> > -- ynezz
Petr, my kernels all give Serial 0000000000000000 and Revision 0000.
AFAIK the ATAG data that this info comes from is not being filled
in. Did you do something different in your kernel?
>
> how did you get eabi working? every time I've tried it, the kernel
starts
> but hangs when starting init :/
>
Triffid, are you sure your userspace is compiled as EABI? Yours is
exactly the symptom I see when I forget and point my EABI kernel to
my older OABI NFSROOT.
The OABI_COMPAT kernel config option will let you run both OABI and
EABI binaries, if you are not sure. (Non-thumb binaries only
though).
Regards, ......... Charlie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|