Hello Everyone,
I am in this sub group: "The other people I see coming here are completely
new to this embedded thing and *nix, and occasionally new to programming."
I have made an SD card bootable and it boots, it took a while but it does boot
(in 1.60 seconds). Now I cd over the the SD card and try to make some changes
in /mnt/root/network/interfaces and get messages that the fs is ro.
I have tried
mount -no remount,rw /
that does nothing. The file system is mounted as read only it he script called
"linuxrc".
So I go over to the 7260 and try to change the script called "linuxrc" and no
mater what I try I can't seem to make changes to it. It is also read only.
I have read several complete message tree from the archives and still not quite
sure what to do.
I need some hints
thanks,
angel
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|