On Wed, 15 Aug 2007, j.chitte wrote:
> Hi,
>
> I spend hours last night looking for the pinout of the DIO connector.
>
> Much of the documentation seems to repeat the same information but
> after ploughing through several pdfs I cant find where to advertised
> 20 GPIO are available.
>
> I guess the LEDs count for two and DIO is presumable portA and portB
> once I have the pinout.
>
> I also need the 1000mA output on bit0 of portC if someone can help me
> find that.
>
you don't say which board. But the 11 io lines on the "LCD" interface and
9 lines on the "DIO" interface of the TS7200 make 20 GPIO lines available
for use on that board. TS publish schematics for the TS7200 and may do for
other boards. Can't comment on other boards.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|