ts-7000
[Top] [All Lists]

[ts-7000] TS-7400 boot problem

To:
Subject: [ts-7000] TS-7400 boot problem
From: "p_maljaars" <>
Date: Fri, 10 Aug 2007 09:25:05 -0000
Hello, 
After putting the power on, both the green and red led turned on. But
after that nothing happens. Also when the ts-9441 is connected, both
leds turned on, also the power led on the ts-9441. But I receive
nothing into the terminal, which is connected to the ts-9441. 

The connection itself is working, because yesterday I could start and
work with the ts-7400.

Any hints or suggestions are appreciated.

Pieter



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
  • [ts-7000] TS-7400 boot problem, p_maljaars <=
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU