Re: [ts-7000] How to connect usb webcam to SCB

[Christopher Friedt <>]

Do a search on the yahoo groups page (under the group ts-7000) and look 
for insmod pcipool. You'll find a list of modules that will need to be 
loaded ahead of your camera module.

Then, compile the v4l driver and the driver for your USB camera as a 
module using make CROSS=arm-linux-, and copy the .o files over to the 
board.

It should work as long as you're using the same kernel version / sources 
as TS used when then shipped your unit.

After that it's a programming excercise - follow the v4l api and use 
ioctls to address the /dev/video0 device.

~/Chris

syedsmt wrote:
> I'm doing for my Final Year Project using the SBC board. Need help
> from you all how to connect usb webcam to SCB.thax..
> 
> 


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/