Hello,
If your interested you can find the HALT testing report here
ftp://ftp.embeddedarm.com/halt.pdf
--
Best Regards,
________________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16610 East Laser Drive Suite 10 | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
PeterElliot wrote:
> Hi Vincent,
>
> What type of power supply are you using and where is it located?
>
> There's a PDF on the embeddedarm ftp site which describes a heat/cold/
> vibration test on a 72xx device - it seemed to hold up very well.
>
> It might be your power supply which is causing the issues if it is
> also located inside the enclosure, but without more information it's
> difficult to diagnose.
>
> Regards,
>
> PJE
>
>
> --- In "vincentkassis" <>
> wrote:
>> We want to use the extended temperature TS-7250-32-32F ARM board in
> a
>> weatherproof enclosure. We have been testing in a Hammond
>> Manufacturing polycarbonate enclosure (it fits in the 1554H2 quite
> well).
>> We think that the board overheats and reacts strangely after a
> certain
>> time in the enclosure. We know that plastic conducts less well than
>> metal, but is it normal that the ARM overheats like that?
>>
>> Did anybody experience similar problems before?
>>
>> Did anybody use a weatherproof plastic (preferably polycarbonate)
>> enclosure with an ARM with success before?
>>
>> Can anyone suggest a metallic enclosure that could be used without
> the
>> need for very specialized tooling?
>>
>> Thank you very much for your help,
>>
>>
>> Vincent
>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|