[ts-7000] CPU speed 200MHz using EP9302

["walter woodrow" <>]

I have found some posts on setting the speed on the 7400 board, but 
still not sure on how to accomplish it.  I have tried the ts7xxx.subr 
setting the max speed but when I get the cpuinfo I still see 99.  From 
what I read the cpuinfo gathers the information at boot time.  So my 
question is how do I setup the 7400 to run at 200 mhz as a default at 
boot?

CPU INFO:
Processor       : Arm920Tid(wb) rev 0 (v4l)
BogoMIPS        : 99.94
Features        : swp half thumb

Hardware        : ep9301
Revision        : 0000
Serial          : 0000000000000000

Thanks.



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/