Re: [ts-7000] Problems with running Bluetooth

["siddhant tewari" <>]

hi,
   first try loading hci_usb ...... also u need to load  rfcomm l2cap for opening rfcomm sockets.......

On 7/5/07, Daniel Rindt <> wrote:

Hello,

with the Standard setup on the TS7400 i try to load the bluetooth modules to
get working. Following modules are loaded already:
$ lsmod
Module                  Size  Used by
firmware_class          3440   0 (unused)
usb-ohci-ep93xx          632   0 (unused)
usb-ohci               15360   0 [usb-ohci-ep93xx]
pcipool                 1888   1 [usb-ohci-ep93xx usb-ohci]
usbcore                55728   0 [usb-ohci]
ts7xxx_nand             1896   0 (unused)

but when i try to load one of the bluetooth related modules i get:
$ modprobe bfusb
Using /mnt/root/lib/modules/2.4.26-ts11/kernel/drivers/bluetooth/bfusb.o
insmod: unresolved symbol hci_register_dev
insmod: unresolved symbol hci_recv_frame
insmod: unresolved symbol hci_unregister_dev
modprobe: failed to load module bfusb

all modules under /mnt/root/lib/modules/2.4.26-ts11/kernel/drivers/bluetooth
aren't loadable. The System in the Flash cant startup the Bluetooth Device?

Thanks in advance
Daniel

__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os	Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___