Ok, I was under the impression that the sdcard that came with the 7260
was capable of being booted to as is. I ran tsboot-update -s to
attempt to boot from the sdcard but it hangs on the startup after 3
dots, and I'm afraid I may have really messed something up. I cannot
reach the interrupt to Redboot either. I was reading about a recovery
method in message #5312, but I am wondering if there is different
method to fix this by doing something to the sdcard, because the
serial blaster method seems a little ... well I'm new at this stuff.
Anyway, did I do something completely stupid and totally kill the
board until I reflash it, either by sending it back to TS or using the
serial blaster? What should I have done to boot the sdcard correctly?
Frustrated,
Zach
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|