[ts-7000] LCD serial , C example code

To:
Subject:	[ts-7000] LCD serial , C example code
From:	"salazarluquin_sf" <>
Date:	Mon, 25 Jun 2007 23:52:11 -0000

Hi, i'm new in this tech.. i need help with some LCD serial, my
question is: There is some way to send data(Tx) to a LCD serial(with
rs232,TTL or I2C) for one pin of the PORTA?
I have the TS-7200 and I Successfully send data for com1, and com2
with a C example, but I need to send it for one pin of the portA.

regards
Sergio 



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] LCD serial , C example code, salazarluquin_sf <= [ts-7000] Re: LCD serial , C example code, Yan Seiner Re: [ts-7000] Re: LCD serial , C example code, Jim Jackson

Previous by Date:	[ts-7000] TS7300 No ethernet, Chris May
Next by Date:	[ts-7000] Re: Some modules refuse to load, charliem_1216
Previous by Thread:	[ts-7000] TS7300 No ethernet, Chris May
Next by Thread:	[ts-7000] Re: LCD serial , C example code, Yan Seiner
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU