--- In Jim Jackson <> wrote:
> I'd reckon that USB is out, because even though the 9302 supports
USB2 it
> only does it at 12M not at 480. Have you looked at the TS-9600?
Dunno if it
> would work with a ts-7300? From a previous thread on the list, this
snipped
> from a post from Eddie...
>
> >>> I'd also like to connect a 3.5" hard drive,
> >>
> >> Take a look at the TS-9600.
> >>
> >> http://www.embeddedarm.com/epc/ts9600-spec.php
> >
> > Hi Eddie, sorry if I've missed this elsewhere, but is there an
Arm Linux
> > driver for this?
>
> Yes, the 2.4.26 IDE driver was modified to work with the TS-RF2-CF as
> well as the TS-9600. You can find documentation on where to download
> the updated drivers(they are installed on all base boards) as well
> as some documentation on the options that need to be passed to the
> drivers here
>
> http://www.embeddedarm.com/Manuals/rf2-cf-info.htm
>
Thanks. Does anyone know if you can stack two of these?
Ideally I'd like to set up a RAID-1 on each end, and with IDE I need
one drive per connector.
--Yan
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|