[ts-7000] Re: ??Mounting usb thumbdrive to TS7300 SBC

["geoffveale" <>]

My board is a TS-7260 so my code may or may not help. But this works
for me..

There are two steps..

Step 1. Run a script loadUSBModules.sh provided by Technologic on the
boards flash to install the drivers for the thumb drive.

Step 2. Mount the drive using this command..

mount -t vfat /dev/scsi/host0/bus0/target0/lun0/part1 /mnt/usbdrive

The above command installs the vfat thumb drive at location /mnt/usbdrive
I wrote my own script file thumb.sh so that I do not need to type the
very long mount instruction every time I want to mount the drive.




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/