[ts-7000] Starting application at power up

To:
Subject:	[ts-7000] Starting application at power up
From:	"wkevinlogan" <>
Date:	Fri, 15 Jun 2007 12:44:32 -0000

I am trying to find the script file to modify or create that will 
start my application automatically after booting from the onboard 
flash on a TS-7400.  

Any Ideas?

Thanks,
Kevin



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Starting application at power up, wkevinlogan <= Re: [ts-7000] Starting application at power up, Kevin Cozens [ts-7000] Re: Starting application at power up, wkevinlogan

Previous by Date:	[ts-7000] EEPROM of TS7250, ?fffd6?fffd3?fffe8?fffaa?fffc8?ffff0
Next by Date:	[ts-7000] no one in the irc channel @freenode #embeddedarm?, Daniel Rindt
Previous by Thread:	[ts-7000] EEPROM of TS7250, ?fffd6?fffd3?fffe8?fffaa?fffc8?ffff0
Next by Thread:	Re: [ts-7000] Starting application at power up, Kevin Cozens
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU