[ts-7000] 7300 USB Port Question

To:
Subject:	[ts-7000] 7300 USB Port Question
From:	"phygman" <>
Date:	Tue, 12 Jun 2007 20:15:32 -0000

Hello All,

Is it possible to configure the USB ports on the 7300 as USB Slaves.  
We want to be able to plug the 7300 into a PC and have it register as 
a serial port on the PC, for communications.

Everything I have read says that this is not possible.  I just wanted 
to throw the question out here to make sure I didn't miss anything.

Thanks
Jim Newton




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] 7300 USB Port Question, phygman <= [ts-7000] Re: 7300 USB Port Question, Sudheendra

Previous by Date:	[ts-7000] Re: rebuilding the SD image, walter woodrow
Next by Date:	Re: [ts-7000] Busybox source version used in TS-7250 distribution?, Jim Jackson
Previous by Thread:	[ts-7000] Busybox source version used in TS-7250 distribution?, Gary Wicker
Next by Thread:	[ts-7000] Re: 7300 USB Port Question, Sudheendra
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU